The CP2102 is a highly-integrated USB-to-UART Bridge Controller providing a simple solution for updating RS232 designs to USB using a minimum of components and PCB space. The CP2102 includes a USB 2.0 fullspeed function controller, USB transceiver, oscillator, EEPROM or EPROM, and asynchronous serial data bus (UART) with full modem control signals in a compact 5 x 5 mm QFN-28 package. No other external USB components are required.
The on-chip programmable ROM may be used to customize the USB Vendor ID, Product ID, Product Description String, Power Descriptor, Device Release Number, and Device Serial Number as desired for OEM applications. The programmable ROM is programmed on-board via the USB, allowing the programming step to be easily integrated into the product manufacturing and testing process. Royalty-free Virtual COM Port (VCP) device drivers provided by Silicon Laboratories allow a CP2102-based product to appear as a COM port to PC applications.
The CP2102 UART interface implements all RS-232 signals, including control and handshaking signals, so existing system firmware does not need to be modified. In many existing RS-232 designs, all that is required to update the design from RS-232 to USB is to replace the RS232 level-translator with the CP2102. Direct access driver support is available through the Silicon Laboratories USBXpress driver set.
Features:
- Integrated USB transceiver; no external resistors required
- Supports Baud rates from 300bps to 1Mbps
- 576 bytes receive buffer and 640 bytes transmit buffer
- Works with existing COM port PC Applications
- On-chip 3.3V voltage regulator
- On-chip power-on reset circuit, On-chip voltage regulator
- Single chip USB to asynchronous serial data transfer interface
Applications:
- Upgrade of RS-232 legacy devices to USB
- Cellular phone USB interface cable
- USB interface cable
- USB to RS-232 serial adapter
Driver Chipset | CP2102 |
Operating Voltage | 3.3 ~ 5V |
Baud rate | 3bps ~ 1Mbps |
Buffer Size | 576Bytes (RX), 640Bytes (TX) |
Connectivity | USB |
Number of Pins | 5 (+5V,GND,RXD,TXD,+3.3V) |
Product Dimensions | 41 x 14mm |
Working Temperature | -40°C ~ +85°C |
Product Weight | 10 grams |
Country of origin : China
Note: The Pins are presoldered to the module.
- CP2102 USB to TTL UART Serial Converter Module