STM32F030F4P6 Development Board (Original Chip)

The STM32F030F4P6 Development Board is a popular choice to learn how to program the STM32 Microcontrollers from ST Microelectronics. The board consists of the STM32F030F4P6 microcontroller which is a ARM Cortex-M 32-bit processor. With its LQFP package type and 20 pins and one crystal oscillators of 8MHz, the STM32F030F4P6 provides a compact yet robust platform for your designs which holds. The MCU has inbuilt 5V to 3.3V voltage regulator to power the MCU. Unlike Arduino boards, the STM32 Development board works on 3.3V.

The MCU contains two onboard LEDs, one is used for power indication and the second LED is connected to the GPIO pin PA4.

The development board can be easily programmed using the Arduino IDE. But if you want to explore the complete STM32 development boards, you can also use the STM32CubeIDE and other development environments offered by ST Microelectronics. You can also use Keil, IAR workbench, Atollic TrueStudio, MicroC Pro ARM, Crossworks ARM, Ride 7, PlatformIO+STM32 etc. to program the board. The board can be programmed directly from the CubeIDE using the ST-Link. The hex file of a program can also be uploaded using a single wire interface module (SWIM) or by using JTAG/ serial wire debugging (SWD).

The device offers one 12-bit ADC, Five general purpose 16-bit timers, as well as standard and advanced communication interfaces: 1x I2Cs and 1x SPI, 1x USART.

Note: This board features an original STM32 chip and it can be directly programmed from the STM32cubeIDE using the ST-Link.

Features:

• 48MHz MAX clock frequency (8M Crystal on board)
• 16K flash memory, 4K SRAM
• 15 general-purpose I/O (GPIO) pins
• Working Temperature: -40°C ~ +85°C
• IWDG and WWDG support
• Interfaces: 1x ADC, 1x USART, 1x SPI, 1x I2C

Country of origin : China

Note: If the pins are unsoldered, the Header pins will be provided separately in the package

• 1 x STM32F030F4P6 Dev Board
• 2 x 12-pin Male-Male Header