STM32F103C6T6 Minimum System Board (Original Chip)

The STM32F103C6T6 Development Board is a popular choice to learn how to program the STM32 Microcontrollers from ST Microelectronics. The board consists of the STM32F103C6T6 microcontroller which is a ARM Cortex-M 32-bit processor. With its LQFP package type and 48 pins and two crystal oscillators of 8MHz and 32KHz crystal, the STM32F103C6T6 provides a compact yet robust platform for your designs which holds. The MCU has inbuilt 5V to 3.3V voltage regulator to power the MCU. Unlike Arduino boards, the STM32 Development board works on 3.3V.

The MCU contains two onboard LEDs, one is used for power indication and the second LED is connected to the GPIO pin PC13. The STM32F103C6T6 MCU contains three boot modes which can be set using the Boot0 and Boot1 jumper pins.

The development board can be easily programmed using the Arduino IDE. But if you want to explore the complete STM32 development boards, you can also use the STM32CubeIDE and other development environments offered by ST Microelectronics. You can also use Keil, IAR workbench, Atollic TrueStudio, MicroC Pro ARM, Crossworks ARM, Ride 7, PlatformIO+STM32 etc. to program the board. The board can be programmed directly from the CubeIDE using the ST-Link. The hex file of a program can also be uploaded using a single wire interface module (SWIM) or by using JTAG/ serial wire debugging (SWD).

The device offers two 12-bit ADCs, three general purpose 16-bit timers, as well as standard and advanced communication interfaces: one I2C and one SPI, two USARTs, an USB and a CAN.

Note: This board features an original STM32 chip and it can be directly programmed from the STM32cubeIDE using the ST-Link.

Features:

• 100% Brand new and high-quality STM32 Board
• 72MHz MAX clock frequency (8M Crystal on board)
• 32K flash memory, 10K SRAM
• 37 general-purpose I/O (GPIO) pins
• Working Temperature: -40°C ~ +85°C
• Low Power, Sleep, stop and Standby modes
• Interfaces: 1 CAN, 2 USART, 1 SPI, 1 I2C, USB 2.0 FS

Country of origin : China

Note: If the pins are unsoldered, the Header pins will be provided separately in the package

• 1 x STM32F103C6T6 Dev Board
• 2 x 20-pin Male-Male Header