STM32F103ZET6 Custom Development Board (Original Chip)

The STM32F103ZET6 performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer three 12-bit ADCs, four general-purpose 16-bit timers plus two PWM timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a CAN.

The STM32F103ZET6 operates in the –40 to +105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications. These features make the STM32F103ZET6 high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems video intercom, and HVAC. The development board of STM32F103ZET6 provide convenience to your development work. It’s cheap and nice appearance.

The development board can be easily programmed using the Arduino IDE. But if you want to explore the complete STM32 development boards, you can also use the STM32Cube and other development environments offered by ST Microelectronics. You can also use Keil, IAR workbench, Atollic TrueStudio, MicroC Pro ARM, Crossworks ARM, Ride 7, PlatformIO+STM32 etc. to program the board. The hex file of a program can be uploaded using a single wire interface module (SWIM) or by using JTAG/ serial wire debugging (SWD).

The device offers 3x 12-bit ADC, 1x DAC, 8x 16-bit timers, as well as standard and advanced communication interfaces: 2x I2C, 3x SPI, 3x USART, 2xUART, 1x USB (Device), 2x I2S and 1x SDIO, 1xCAN, 1xFSMC

Note: This board features an original STM32 chip and it can be directly programmed from the STM32cubeIDE using the ST-Link.

Features:

• 100% Brand new and high-quality STM32 Board
• 72MHz MAX clock frequency (8M Crystal on board)
• 512K flash memory, 64K SRAM
• Standard 20-pin JTAG socket
• CR1220 battery holder for clock with battery backup
• NRF24L01 socket, Serial Header, SDIO Connector (UnSoldered), SRAM Connector (UnSoldered)
• On board MX25L1606E SPI Flash chip 16Mbit and AT24C02N EEPROM 2Kbit
• 1x external pin serial port
• Interfaces: 1xSDIO, 3xUSART, 3xSPI, 2xI2C, 1xUSB, 2xI2S, FSMC, SDIO

Country of origin : China

Note: Pins are already soldered to the board.

• 1x STM32F103ZET6 Dev Board
• 1x CR1220 battery
• 1x USb Cable