WeAct Studio STM32F405RGT6 Development Board

This STM32F405 development board features the STM32F405RGT6, this chip has 1024KB of FLASH, 192KB of SRAM and runs at 168MHz. It features a USB Type-C connector and a 3.3V 100mA LDO regulator. Also, a diode is connected in series to prevent power backflow. There are both 8Mhz 10pF high-speed and 32.768Khz 12pF low-speed crystals on board.

The STM32F405 development board has micro SD connector on board to give yourself more space for data logging or file storage.

The development board can be easily programmed using the Arduino IDE. But if you want to explore the complete STM32 development boards, you can also use the STM32Cube and other development environments offered by ST Microelectronics. You can also use Keil, IAR workbench, Atollic TrueStudio, MicroC Pro ARM, Crossworks ARM, Ride 7, PlatformIO+STM32 etc. to program the board. The hex file of a program can be uploaded using a single wire interface module (SWIM) or by using JTAG/ serial wire debugging (SWD).

The device offers 3x 12-bit ADCs with a total of 46 channels, 1x 12-bit DAC, 2x 32-bit and 12x 16-bit timers, as well as standard and advanced communication interfaces: 3x I2C, 3x SPI, 4x USART, 2x UART, 2x CAN, 1x USB-FS (Host & Device), 1x USB-HS (Host & Device), 2x I2S, and 1x SDIO.

Note: This board features an original STM32 chip and it can be directly programmed from the STM32cubeIDE using the ST-Link.

Features:

• 100% Brand new and high-quality STM32 Board
• 168MHz MAX clock frequency (8M Crystal on board)
• 1024K flash memory, 192K SRAM
• 45 general-purpose I/O (GPIO) pins
• Working Temperature: -40°C ~ +85°C
• Low Power, Sleep, stop and Standby modes
• Interfaces: 1xSDIO, 4xUSART, 3xSPI, 3xI2C, 2xUSB, 2xI2S, 2xCAN etc.

Country of origin : China

Note: Header pins are not soldered, but are provided separately in the package.

• 1 x STM32F405 Dev Board
• 3 x Male-Male Headers