WeAct Studio STM32H562RGT6 Development Board

This STM32H562 development board features the STM32H562RGT6, this chip has 1024KB of FLASH, 640KB of SRAM and runs at 250MHz. It features a USB Type-C connector and a 3.3V 100mA LDO regulator. Also, a diode is connected in series to prevent power backflow. There are both 8Mhz 10pF high-speed and 32.768Khz 12pF low-speed crystals on board.

The STM32H562 development board has micro SD connector on board to give yourself more space for data logging or file storage.

The development board can be easily programmed using the Arduino IDE. But if you want to explore the complete STM32 development boards, you can also use the STM32Cube and other development environments offered by ST Microelectronics. You can also use Keil, IAR workbench, Atollic TrueStudio, MicroC Pro ARM, Crossworks ARM, Ride 7, PlatformIO+STM32 etc. to program the board. The hex file of a program can be uploaded using a single wire interface module (SWIM) or by using JTAG/ serial wire debugging (SWD).

The device offers 2x 12-bit ADCs with a total of 38 channels, 1x 12-bit DAC, 2x 32-bit and 12x 16-bit timers and 6x LP-Timers as well as standard and advanced communication interfaces: 4x I2C, 3x I3C, 4x SPI, 5x USART, 3x UART, 1x LP-UART, 1x FD-CAN, 1x OCTOSPI, 1x SDMMC, 1x USB-FS (Host & Device), 1x USB (Host & Device), 3x I2S, 2xSAI, 1x DCMI and other security features.

Note: This board features an original STM32 chip and it can be directly programmed from the STM32cubeIDE using the ST-Link.

Features:

• 100% Brand new and high-quality STM32 Board
• 250MHz MAX clock frequency (8M Crystal on board)
• 1024K flash memory, 640K SRAM
• 45 general-purpose I/O (GPIO) pins
• Working Temperature: -40°C ~ +85°C
• Low Power, Sleep, stop and Standby modes
• Interfaces: SDMMC, FDCAN, VREFBUF, OSCTOSPI, UPCD, HDMI_CEC, PSSI etc.

Country of origin : China

Note: Header pins are not soldered, but are provided separately in the package.

• 1 x STM32H562 Dev Board
• 3 x Male-Male Headers